FK Rod Ends WSSX Wide Series PTFE Coated 3/4" Hole Uniball Spherical Bearing With Groove
The WSSX series uniballs are FK's wide series which has a 17-4 stainless heat treated body with a 440C stainless heat treated ball which is PTFE coated.
Cross Reference:
Aurora Bearing Company: PWB-12T
Aurora Bearing Company: PWB12T
Important Note:
On 3/4" uniballs, if you use a high angle misalignment spacer, you must put the spacers in a lathe and radius them for a uniball. The radius of the misalignment matches a heim joint, but on 3/4" uniballs, the edge hangs over and will peel out the PTFE liner in your uniball. See below picture.
teflon
Cross Reference:
Aurora Bearing Company: PWB-12T
Aurora Bearing Company: PWB12T
Important Note:
On 3/4" uniballs, if you use a high angle misalignment spacer, you must put the spacers in a lathe and radius them for a uniball. The radius of the misalignment matches a heim joint, but on 3/4" uniballs, the edge hangs over and will peel out the PTFE liner in your uniball. See below picture.
teflon
The WSSX series uniballs are FK's wide series which has a 17-4 stainless heat treated body with a 440C stainless heat treated ball which is PTFE coated.
Cross Reference:
Aurora Bearing Company: PWB-12T
Aurora Bearing Company: PWB12T
Important Note:
On 3/4" uniballs, if you use a high angle misalignment spacer, you must put the spacers in a lathe and radius them for a uniball. The radius of the misalignment matches a heim joint, but on 3/4" uniballs, the edge hangs over and will peel out the PTFE liner in your uniball. See below picture.
teflon
Cross Reference:
Aurora Bearing Company: PWB-12T
Aurora Bearing Company: PWB12T
Important Note:
On 3/4" uniballs, if you use a high angle misalignment spacer, you must put the spacers in a lathe and radius them for a uniball. The radius of the misalignment matches a heim joint, but on 3/4" uniballs, the edge hangs over and will peel out the PTFE liner in your uniball. See below picture.
teflon